Mr DeepFakes Forums
  • New and improved dark forum theme!
  • Guests can now comment on videos on the tube.
   
Total Likes Received: 1 (0.15 per day | 0.12 percent of total 833)
(Find All Threads Liked ForFind All Posts Liked For) Total Likes Given: 0 (0 per day | 0 percent of total 834)
(Find All Liked ThreadsFind All Liked Posts)

HCF
(NewFaker)
NewFaker

Registration Date: 04-12-2019
Date of Birth: Not Specified
Local Time: 04-19-2019 at 04:25 AM
Status:

HCF's Most Liked Post
Post Subject Numbers of Likes
Hello! 1
Thread Subject Forum Name
Hello! Introductions
Post Message
Hey all, I'm glad to be here! I've got a passion for comedy and learning about machine learning in particular. Deepfakes seem to be a way to further both of those. 

I got started last night and have just been tooling around with base shia labeouf/RBDjr project in the DeepFaceLabOpenCLSSE prebuilt windows binary latest release. On a fresh windows install just for deepfaking.

I run an intel i7 and have a radeon amd card and it always seems to hang on face extraction pass 3, both MT and S3FD. With no progress bar. But it does max out the GPU. No files are added to aligned.


It says
 
Performing 3rd pass...
Running on CPU4.
Running on CPU7.
Running on CPU3.
Running on CPU2.
Running on CPU1.




Any ideas for a newbie?

I've actually discovered the solution to the issue after thinking about how it hangs on the processors. There are two you can try, they both independently work for me.

One: you could disable hyperthreading in the bios. I've got 8 logical cores with hyperthreading enabled on 4 processors. By disabling hyperthreading there's only 4.

The second is to reduce the number of cores by going to

run -> msconfig -> boot -> advanced options

check the box next to number of processors. And ensure that you are using 4 or below. For some reason DFL for me isn't working with more than 4. But that's okay because of finding this solution. It works now! And I hope this helps someone else. I'm going to go post it in another thread I was reading about the issue as well. Smile Glad to be here!

HCF's Forum Info
Joined:
04-12-2019
Last Visit:
04-13-2019, 09:38 PM
Total Posts:
2 (0.3 posts per day | 0.04 percent of total posts) Find All Posts
Total Threads:
1 (0.15 threads per day | 0.09 percent of total threads) Find All Threads
Time Spent Online:
4 Hours, 7 Minutes, 25 Seconds
Thanks/Likes:
Given: 0 | Recieved: 1
Members Referred:
0
HCF's Contact Details